Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > PNEUMATIC NAILERS > PNEUMATIC FRAMING NAILERS
Sort By:
1
FramePro 4Z0101N Pneumatic Strip Framing Nailer JoistPro 7L0001N Connector Nailer Stanley F21PL2 Angled Framing Nailer
FramePro Framing Nailer, Pneumatic Strip, Series: 4Z0101N, 2 - 3-1/4 in Fastener, 34 deg Collation, 83 Magazine Capacity, 0.113 - 0.148 in Shank, Triggering Mode: Selectable Actuation, 5.2, 70 - 120 psi Operating, Aggressive Tip, 3/8 in Air Inlet, 17-5/16 in Length, 4-1/2 in Width, 11-7/8 in Height, Aluminum Housing, For Framing, Sheathing, Crate JoistPro Connector Nailer, Series: 7L0001N, 1-1/2 in Fastener, 34 deg Collation, 30 Magazine Capacity, 0.131 - 0.148 in Shank, Triggering Mode: Sequential Actuation, 2.3, 70 - 120 psi Operating, Adjustable Exhaust, 1/4 in Air Inlet, 10-3/8 in Length, 4 in Width, 12 in Height, Magnesium Housing, Includes: Wrenches, Tool Oil, Safety Glasses and Plug Stanley Framing Nailer, Angled, 2 - 3-1/2 in Fastener, Plastic Full Round Collated Nail Fastener, 21 deg Collation, 60 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.162 in Shank, Triggering Mode: Selectable, 0.075, 80 - 120 psi Operating, Front Exhaust, Nose Adapter Tip, 1/4 in MNPT Air Inlet, Comfort Grip Handle, 20-1/4 in Length
Hitachi NR90AEPR Lightweight Framing Nailer Stanley F33PT Angled Framing Nailer Stanley F21PL Angled Framing Nailer
Hitachi Framing Nailer, Lightweight, 2 - 3-1/2 in Fastener, Plastic Collated Nail Fastener, 21 deg Collation, 64 Magazine Capacity, Rear Magazine Loading, Triggering Mode: Selective, 0.09, 70 - 120 psi Operating, 3/8 in NPT Air Inlet, Rubber Grip Handle, 20.8 in Length, 4.9 in Width, 7-1/2 in Height, Includes: Safety Glasses Stanley Framing Nailer, Angled, 2 - 3-1/2 in Fastener, Paper Tape Clipped Collated Nail Fastener, 33 deg Collation, 80 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.162 in Shank, Triggering Mode: Sequential, 0.075, 80 - 120 psi Operating, Adjustable Exhaust, Nose Adapter Tip, 1/4 in MNPT Air Inlet, Comfort Grip Handle, 18 in Length Stanley Framing Nailer, Angled, 2 - 3-1/2 in Fastener, Plastic Full Round Collated Nail Fastener, 21 deg Collation, 60 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.162 in Shank, Triggering Mode: Sequential, 0.075, 80 - 120 psi Operating, Adjustable Exhaust, Nose Adapter Tip, 1/4 in MNPT Air Inlet, Comfort Grip Handle, 20-1/4 in Length
Stanley LPF33PT Full Offset Framing Nailer Stanley LPF21PL Lightweight Framing Nailer Hitachi NR90ADPR Lightweight Framing Nailer
Stanley Framing Nailer, Full Offset, 2 - 3-1/4 in Fastener, Paper Tape Collated Nail Fastener, 33 deg Collation, 92 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.131 in Shank, Triggering Mode: Contact/Sequential, 0.075, 70 - 120 psi Operating, Fixed Exhaust, Aggressive Tip, 1/4 in NPT Air Inlet, Comfort Grip Handle, 20-1/2 in Length Stanley Framing Nailer, Lightweight, 2 - 3-1/4 in Fastener, Plastic Collated Nail Fastener, 21 deg Collation, 64 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.148 in Shank, Triggering Mode: Contact/Sequential, 0.075, 70 - 100 psi Operating, Fixed Exhaust, Nose Adapter Tip, 1/4 in NPT Air Inlet, Comfort Grip Handle, 22-1/2 in Length Hitachi Framing Nailer, Lightweight, 2 - 3-1/2 in Fastener, Clipped Paper Tape Collated Nail Fastener, 35 deg Collation, 50 - 74 Magazine Capacity, Rear Magazine Loading, 0.113 - 0.148 in Shank, Triggering Mode: Selective, 0.09, 70 - 120 psi Operating, Front Exhaust, 3/8 in NPT Air Inlet, Rubber Grip Handle, 18.2 in Length, 4.9 in Width
Bostitch Strapshot Metal Connector Nailer Stanley F28WW Angled Framing Nailer CONNECTOR NAILER METAL 1-1/2
Bostitch Metal Connector Nailer, Series: Strapshot, 1-1/2 in Fastener, Paper Tape Full Round Collated Nail Fastener, 35 deg Collation, Short Magazine, 29 Magazine Capacity, Bottom Magazine Loading, 0.131 - 0.148 in Shank, Triggering Mode: Contact/Sequential, 6.7, 70 - 120 psi Operating, Aggressive Tip, 1/4 in NPT Air Inlet, 11-3/4 in Length Stanley Framing Nailer, Angled, 2 - 3-1/2 in Fastener, Full Round Wire Weld Collated Nail Fastener, 28 deg Collation, 100 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.131 in Shank, Triggering Mode: Sequential, 0.075, 80 - 120 psi Operating, Adjustable Exhaust, No-Mar Tip, 1/4 in NPT Air Inlet, Comfort Grip Handle, 20 in Length At 10.5" (26.7 cm) tall, fits conveniently inside 12" (30.5 cm) on-center framing and other tight areas. Fastener placement made easy with exposed nail tip. Tool-free adjustable rafter hook for convenience. Low nail lockout helps prevent jamming. In-line magazine for a well balanced tool. Slip on grip. 29.0 magazine capacity. Belt/rafter hook included. Adjustable exhaust. Operating pressure 70-120 psi. Lightweight tool at only 4.6 lbs.
FRAMING NAILER 21DEG PLSTIC RH FRAMING NAILER 30DEG PAPER    FRAMING NAILER 28 DEG WIRE WLD
FRAMING NAILER 30DEG PAPER
Our Price: $246.42
Industrial grade design for high speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Adjustable rafter hook. Lightweight at only 8 lbs. with enhanced ergonomics and balance for comfort and control. Tool free features depth-of-drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Fastener diameter range .113 to .148". Magazine capacity of 50 nails. Operating pressure 70-120 psi. Overmold grip. 30 degree paper tape collated framing nailer. Industrial grade design for high speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lbs with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Top load magazine. Magazine capacity of 75 nails. Operating pressure 70-120 psi. Overmold grip. 28 degree wire weld framing nailer. Industrial grade design for high speed and high volume framing applications. Recoil dampening engine system to minimize recoil. Lightweight at only 8.1 lbs with enhanced ergonomics and balance for comfort and control. Tool-free features depth of drive adjustment for precise setting of fasteners and selectable trigger for bump or sequential actuation mode. Top load magazine. Magazine capacity of 100 nails. Operating pressure 70-120 psi.
JoistPro 6K0001N Connector Nailer Hitachi NR83A2 Framing Nailer with Depth Adjustment FramePro 701XP 2H0133N Framing Nailer
JoistPro Connector Nailer, Series: 6K0001N, 1-1/2 - 2-1/2 in Fastener, 34 deg Collation, 20 Magazine Capacity, 0.131 - 0.162 in Shank, Triggering Mode: Sequential Actuation, 4.1, 70 - 120 psi Operating, Adjustable Exhaust, 1/4 in Air Inlet, 13-13/16 in Length, 4-4/16 in Width, 14-1/8 in Height, Magnesium Housing, Includes: Wrenches, Tool Oil Hitachi Framing Nailer, 2 - 3-1/4 in Fastener, Full Round Plastic Strip Collated Nail Fastener, 21 deg Collation, 64 - 70 Magazine Capacity, Top Magazine Loading, 0.113 - 0.131 in Shank, Triggering Mode: Selective, 0.064, 70 - 120 psi Operating, Front Top Exhaust, No-Mar Tip, 3/8 in NPT Air Inlet, Rubber Grip Handle, 21-13/16 in Length FramePro 701XP Framing Nailer, 2- 3-1/2 in Fastener, 9 - 11.5 ga Clipped Paper Tape Collated Nail Fastener, 34 deg Collation, 70 Magazine Capacity, Bottom Magazine Loading, 0.113 - 0.148 in Shank, Triggering Mode: Sequential, 70 - 120 psi Operating, 360 deg Adjustable Exhaust, Nose Adapter Tip, 3/8 in NPT Air Inlet, Comfort Grip Handle
Hitachi NR83AA3 Framing Nailer Hitachi Strap-Tite Pneumatic Fastening Nailer
Hitachi Framing Nailer, 2 - 3-1/4 in Fastener, Clipped Paper Strip Collated Nail Fastener, 34 deg Collation, 86 - 94 Magazine Capacity, Rear Magazine Loading, 0.113 - 0.131 in Shank, Triggering Mode: Selective, 0.088, 70 - 120 psi Operating, Adjustable Exhaust, Hardened Claw Tip, 3/8 in NPT Air Inlet, Rubber Grip Handle, 18-1/8 in Length Hitachi Fastening Nailer, Series: Strap-Tite, Pneumatic, 1-1/2 - 2-1/2 in Fastener, Paper Strip Collated Nail Fastener, 36 deg Collation, Short Magazine, 22 Magazine Capacity, Rear Magazine Loading, 0.131 - 0.162 in Shank, Triggering Mode: Sequential, 0.063, 80 - 120 psi Operating, 3/8 in NPT Air Inlet, Racket Grip Handle, 11-3/4 in Length
   
 
1